50 m 5150HP FiFi 1 Anchor Handling Tug

50 m 5150HP FiFi 1 Anchor Handling Tug from Megalodon Marine Sdn Bhd

By: Megalodon Marine Sdn Bhd   12-08-2010
Keywords: Marine Equipment, Marine, Ship Builders & Repairers

Length Overall: 49.95M
Breadth Moulded: 12.60M
Depth Moulded: 5.75M
Design Draft: 4.50M
Deadweight: 700 metric tonnes
Class: BV
Year complete 2010 (5 months to completion) 
Port of registry: SINGAPORE
Bollard Pull Min. 54t Class:                      

Main Engines:        2 x CUMMINS
Horse Power:        2575BHP @ 1800RPM
Gear Box                        2 x Twin Disc
Auxillary Engines:        2 x CUMMINS 
Alternators:        2 x 250KW/415V/50HZ
Emergency Genset        Cummins 
Propellers:                         MANGANESE BRONZE/4 BLADE FIXED PITCH IN KORT NOZZLE
Bow Thruster:         RIQ 350BTM DRIVE BY CUMMINS ENGINE 350HP (New Engine) c/w gear box.
Sewage Treatment Plant:    Capacity 35 men (Made in Korea)
Oily Water Separator:          15PPM Bilge Separator (Korea Made)
Fuel Transfer Pump:           Desmi Pump X 2 10M3/HR @ 20M HEAD
Bilge & Ballast Pump:           Desmi Pump 70M3/HR @ 50M HEAD
Cargo Oil Pump           Desmi Rotan Pump 70M3/HR @ 50M HEAD
Dirty Oil Pump           Itur Pump 5M3/HR @ 30M HEAD

Fuel Oil:                            APPROX 500M3
Fresh Water:            APPROX 242M3
Lub Oil:                            APPROX 14M3
Dirty Oil:                            APPROX 5M3
Freezer/Chiller            APPROX 10M3
Clear Deck Area:            22M X 10M

GMDSS Station:            COMPLY GMDSS A1+A2+A3
VHF:                             2 X Furuno FM-8800s
Magnetic Compass:             Daiko Tikai
Gyro Compass:             Tokimec TG8000
Auto Pilot:                             Simrad AP50
Radar:                             Furuno, FAR-2117 (2 Unit) C/W SCANNER
Echosounder:             JMC F-2000
INMARSAT-C             Furuno Felcom-15
Navtex Receiver:             Furuno NX-700B
GPS:                             Furuno GP-150
AIS                             Furuno FA150
SSB                             Furuno FS-2570

Towing Winch:             ME 80T
Upper & Lower Mooring drum  52MM x 1000M
Bollard Pull:             54.7T
Tugger Winch:             2 x ME 10t
Windlass:                             ME 5T AT 6.2 Ton X 10m/min
Anchors:                              2 X STOCKLESS BOWER ANCHOR
Chain:                              38MM DIA X 27.5M X 2 x 20 LENGTH
Rope Reel                              2 X ME 10T at 20m/min
Capstan                             2 X ME 5T at 15m/min
Shark Jaw                             ME 200tons
Towing pin                             ME 200tons

Keywords: Boat Builders, Marine, Marine Consultant, Marine Equipment, Naval Architecture, ship broker, Ship Builders & Repairers, Ship Building, Ship Repair Service, Shipyard, Tug Boats, Tugboat

Contact Megalodon Marine Sdn Bhd


Print this page