Oil Treatment Plant for Transformer Oil Purification, Degasification, Dewater
FuooTech Oil Purifier & Oil Purification Systems Manufacture Co., Ltd
Filtering Equipment & Supplies, Oil Purifier, Oil Regeneration
What is an oil treatment plant?
Transformer oil is generally mixed with gas, water and contaminants. The content of the contaminants generally increases with time. In the oil treatment plants (OTP) these associated gases, water and contaminants are separated from the oil and taken away. In transformer applications, it is electrically critical that the oil does not contain too much of these substances. After treating the oil in the oil treatment plant, the stabilized oil is then again ready to be used in power transformers.
The plant is laid out for the following operations:
--Degassing, dewatering and filtering of transformer oil
The oil treatment plant is specially designed for degassing, dewatering and filtrating crude oil. The ZYD-I-30 Model OTP is used for treating the unqualified oil, especially the contaminants in the oil.
--Drying of electrical apparatuses while simultaneously treating the oil on-site when filling the electrical apparatuses with oil. The ZYD-I-30 Model OTP is used for transformer installation and overhaul on-site.
--ZYD-I-30 Model OTP’s can be used for regeneration of transformer oil. In this application the ZYD-I-30 Model OTP improves the quality indexes of old oil that has been used for a long time in a power transformer.
This plant's capacity covers 600 Liters/ hour ~ 18000 Liters/ hour, or more..
Source: oil purifier, oil purification, oil filtration system, oil restoration, oil re-processing, oil recycling
Filtering Equipment & Supplies
, Insulating Oil Filter Machine
, Insulation Oil Recycling Plant
, Oil And Water Separator
, Oil Purifier
, Oil Purifier Manufacture
, Oil Purifiers
, Oil Regeneration
, Oil Tester
, Oil Treatment Plant
, Portable Insulation Oil Treatment Purifier