LED Power Analyzer MPM8000S

LED Power Analyzer MPM8000S from Shenzhen Huayansheng Electron Co.,Ltd

By: Shenzhen Huayansheng Electron Co.,Ltd  18-06-2012
Keywords: Power meter, Power Analyzer, Panel Meter

power meter tester
optional modules meet different function
elegant appearence
easily install connect to PC, store data

Hot Sale Multi-Function Power Meter Tester MPM8000S
MPM8000S is a powerful multifunction power meter with modular design, which can be applied for monitoring and controlling of the electrical system. MPM8000S can measure and analyze power parameters, such as U,I,In,F ,S,P,Q,PF,kWh,kvarh etc. MPM8000S has the following functions: RS-485 communication port (MODBUS Protocol),Max/min data record, analog output, digital signal input, and multi- tariff function etc.  
All our instruments fulfill all important requirements and regulations concerning electromagnetic compatibility and safety isolation (IEC61000, IEC1010 standard and EN61010 standard). The devices have been developed, manufactured, and tested in accordance with Quality Assurance System ISO 9001.

1.2,Measured scope  

The meter can be applied in secondary measure in high and low voltage electrical system.The measured data can be communication transmitted.
It can achieve the function of meansureing and anylzing parameters for single phase, 3-Ph 3wire and 3-Ph 4Wire system (include unbalance load). 

1.3,Technical Specification  

Input Current
Current input:5A
Measured scope:0.5%~120% In
Overload: 2 X rated continuously,100A/1s non continuously
Measured power consumption: ≤ 0.2 VA per phase
Voltage Input
Voltgae input:400VAC(phase voltage),693VAC(wire voltage)
Allowed frequency scope: 45~65Hz
Measurement Scope:3%~120%
Overload: 2 X rated continuously,2500V/1s non continuously
Power consumption: ≤ 0.5VA per phase
Remote input(optional) input channel:   1channel  
input mode:   Dry contact

Analog output(optional)
Output channel 1 channel programmble
output signal 4~20mA or 0~5V(optional)
Response time ≤400ms
Output wave ≤18mV(sharp-sharp value)
load capitity ≤500Ω(4~20mA) or ≥250Ω(0~5V)

Pulse output(standard)
No. of outputs 2 channels(active/reactive energy each without power)
Output type Reactive pulse output
Pulse Energy Constant 1 ~ 9600
Pulse width (20 ~ 100)ms

Serial com. port(optional)
NO. of outputs 1 RS-485 port
Communication protocol Modbus-RTU protocol
Baud rate 2400,4800,9600,19200,38400 bps

Multi-tariff rate (optional)
No. of time phase 2 - 12 phase
alternate time a multiply of 30 minutes
multi-tariff type sharp,peak,flat,valley
time pahse 2 - 12 phase  

Other parameters    
Auxiliary power 85~265VAC/DC (30VDC is optional; 23 is “+" terminal and 24 is “-" terminal when use DC.)    
Display type LED display    
Operation type Key or software operation    
Temp. drifting factor: <100PPM/°C
Withstand Voltage (Input against input): 2500V/1 min  
Withstand Voltage (Input against output): 2500V/1 min  
Withstand Voltage (Remote input against output): 1500V/1 min   
Total power consumption: <5VA 
Operation temperature: -20°C~60°C
Storage temperature: -40°C~85°C
Operation humidity: 5~95%RH
Pollution Class:  Class 2
Material of Housing:Flammability acc. to UL94V0
Protection Class Temp.:  IP 30         
Dimensional Size 96 mm x 96 mm x 78mm    
Installation size 91 x 91mm

Keywords: AC Power Meter, Panel Meter, Power Analyzer, Power meter, Power Quality Meter, RS485 Power Meter,

Contact Shenzhen Huayansheng Electron Co.,Ltd


Print this page