Dwyer Photohelic Gauge

Dwyer Photohelic Gauge from Dwyer Malaysia

By: Dwyer Malaysia  16-08-2012
Keywords: Photohelic gauge

Dwyer GAGE SPECIFICATIONS Service: Air and non-combustible, compatible gases. Wetted Materials: Consult factory. Accuracy: ±2% of FS at 70°F (21.1°C). ±3% on -0 and ±4% on -00 models. Pressure Limits: -20" Hg to 25 psig (-0.677 bar to 1.72 bar). MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar). Temperature Limits: 20 to 120°F. (-6.67 to 48.9°C). Process Connections: 1/8 female NPT (duplicated side and back). Size: 4" (101.6 mm) dial face, 5" (127 mm) O.D. x 3-1/8" (79.38 mm). Weight: 1.8 lb (816 g). SWITCH SPECIFICATIONS 3000MR Switch Type: Each setpoint has 1 Form C relay (SPDT). Relay Contacts: (resistive load) 1 Form C rated 1.0A @ 30 VDC, 0.3A @ 110 VDC or 0.5A @ 125 VAC. Gold over clad silver - suitable for dry circuits. Electrical Connections: 18" (46 cm) cable assembly with 8 conductors. Optional lengths to 100´ (30.5 m). Power Requirements: 24 VDC, regulated ±10%. Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations. Set Point Adjustment: Adjustable knobs on face. Agency Approvals: CE. SWITCH SPECIFICATIONS 3000MRS Switch Type: Each setpoint has a solid state relay. Switching Voltage: 20-280 VAC (47 - 63 Hz). Switching Current: 1.0 amp (AC) max., 0.01 mA (AC) min., (2) SPST N.O. Electrical Connections: 18" (46 cm) cable assembly with 6 conductors, Optional lengths to 100´ (30.5 m). Power Requirements: 24 VDC, regulated ±10%. Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations. Set Point Adjustment: Adjustable knobs on face. Agency Approvals: CE.

Keywords: Photohelic gauge

Other products and services from Dwyer Malaysia

Mass Flow Controller from Dwyer Malaysia thumbnail
26-12-2013

Mass Flow Controller

Mass Flow Controller


Flowmeters from Dwyer Malaysia thumbnail
01-08-2012

Flowmeters

Dwyer variable area flowmeter / rotameter.


Magnehelic® gage from Dwyer Malaysia thumbnail
15-06-2012

Magnehelic® gage

The design resists shock, vibration and over-pressures.