Backersafe Immersion Heater

Backersafe Immersion Heater from dpstar Thermo Control Electric Sdn. Bhd

By: dpstar Thermo Control Electric Sdn. Bhd  26-06-2015
Keywords: Immersion Heaters

dpstar is a sole agent of selling heating element products that is Backersafe Immersion Heaters are manufactured to the latest legislation of BSEN60335-2-73. Two specific clauses within this specification are aimed at eliminating the risk of boiling water. The most significant requirement is that the immersion heater be isolated from the mains supply should the primary thermostat fail with the contacts closed which would allow the water to reach a temperature in excess of 85 degrees centigrade.The ‘Backersafe’ Immersion heaters are manufactured in a full range of sheath material including copper, incoloy 800, incoloy 825 and titanium to suit the varying water conditions around the country.Through continuous investments in research and development, our engineering team is able to develop a pattern of constant innovation, in-line with our commitment towards achieving the finest. More than 100 employees currently work in dpstar, in one production centre and twelve sales offices through out Peninsular Malaysia. Our strength lies in our abilities and dare to innovate ahead of our time.The inclusion of modern equipment and sophisticated technology had made our company dpstar to be much faster and efficient.As one of the leading manufacturer in Malaysia we promise you that our Backersafe Immersion Heaters is for any voltage or wattage within the limits of manufacturing.Also our heaters can be also be supplied with suitable mild steel, stainless steel pockets, mounting flanges and bosses. We are UL certified, CE certified in Malaysia as an industry professional in heaters. For more information you can visit our website at www.dpstar.com.my.

Keywords: Immersion Heaters

Contact dpstar Thermo Control Electric Sdn. Bhd

Email

Print this page

Share

Other products and services from dpstar Thermo Control Electric Sdn. Bhd

Bobbin Heater from dpstar Thermo Control Electric Sdn. Bhd thumbnail
15-09-2016

Bobbin Heater

dpstar is one of the top Ceramic bobbin heater manufacturer & supplier company in Malaysia to supply these high quality


EWISELINK EAC M12 from dpstar Thermo Control Electric Sdn. Bhd thumbnail
19-08-2016

EWISELINK EAC M12

Ewiselink is one ideal product cooling units can be installed on the indoor, outdoor, wall or window. Economical less than


EWISELINK EAC 75G from dpstar Thermo Control Electric Sdn. Bhd thumbnail
19-08-2016

EWISELINK EAC 75G

Ewiselink is one ideal product cooling units can be installed on the indoor, outdoor, wall or window. Economical less than


EWISELINK EAC 45L from dpstar Thermo Control Electric Sdn. Bhd thumbnail
19-08-2016

EWISELINK EAC 45L

Ewiselink is one ideal product cooling units can be installed on the indoor, outdoor, wall or window. Economical less than


EWISELINK EAC 40G from dpstar Thermo Control Electric Sdn. Bhd thumbnail
19-08-2016

EWISELINK EAC 40G

Ewiselink is one ideal product cooling units can be installed on the indoor, outdoor, wall or window. Economical less than


PVC Twisted Shielded 1 Pair from dpstar Thermo Control Electric Sdn. Bhd thumbnail
07-11-2015

PVC Twisted Shielded 1 Pair

PVC twisted/shielded thermocouple cable is ideal for systems sensitive to induced voltage and electrical noise. The twisting of the conductor


PVC Extruded Rip Cord from dpstar Thermo Control Electric Sdn. Bhd thumbnail
07-11-2015

PVC Extruded Rip Cord

105C rated flame retardant PVC insulation provides excellent chemical and abrasion resistance. Rip Cord product is unique in design and


PVC Duplex from dpstar Thermo Control Electric Sdn. Bhd thumbnail
07-11-2015

PVC Duplex

105C rated flame retardant PVC insulation provides excellent chemical and abrasion resistance. UL Listed Construction are also available. PVC a


Nylon Duplex from dpstar Thermo Control Electric Sdn. Bhd thumbnail
07-11-2015

Nylon Duplex

Nylon insulation is available for application requiring a small diameter and /or 250F (121C) temperature rating. Nylon is extruded over


TEX/TW FEP Twisted from dpstar Thermo Control Electric Sdn. Bhd thumbnail
07-11-2015

TEX/TW FEP Twisted

FEP is an extruded fluoropolymer suitable for use up to 400 F (200C), and is flame retardant and non-propagating in


TEX FEP Duplex from dpstar Thermo Control Electric Sdn. Bhd thumbnail
07-11-2015

TEX FEP Duplex

FEP is an extruded fluoropolymer suitable for use up to 400 F (200C), and is flame retardant and non-propagating in


PFA Duplex from dpstar Thermo Control Electric Sdn. Bhd thumbnail
07-11-2015

PFA Duplex

PFA is an extruded fluoropolymer suitable for use up to 500 F (260C), and is flame retardant and non-propagating in


TFE Tape Duplex from dpstar Thermo Control Electric Sdn. Bhd thumbnail
07-11-2015

TFE Tape Duplex

TFE Tape is a fluoropolymer suitable for use up to 500 F (260C), and is flame retardant and non-propagating in


G-Glass Fiberglass Duplex from dpstar Thermo Control Electric Sdn. Bhd thumbnail
07-11-2015

G-Glass Fiberglass Duplex

G-Glass Fiberglass. Individual conductors are insulated with general purpose fiberglass and with an overall fiberglass jacket. Designed for continuous use


Q-Glass TW Fiberglass Twisted from dpstar Thermo Control Electric Sdn. Bhd thumbnail
07-11-2015

Q-Glass TW Fiberglass Twisted

Q-Glass Fiberglass twisted. Individual conductors are insulated with high strength fiberglass braid and twisted. Designed for continuous use in high