Rubber Sheeting Mill

Rubber Sheeting Mill from Pahang Judong Industry Co.,Ltd.

By: Pahang Judong Industry Co.,Ltd.  05-01-2010
Keywords: rubber mixing machine

 Model XK-400 XK-450 XKY-550 XKY-660 XKY-710 1、Working diameter of rolls mm 400 450 550 660 710 2、Working length of rolls mm 1000 1200 1500 2130 2200 3、Working linear speed of front roll m/min 21.9 28 31.17 22-7 30.26 4、Friction ratio of front and rear roll 1:1.08 1:1.08 1:1.09 1-24 1:1.51 5、Capacity per batch(mix-up stock) kg 18-35 50 540kg/h 165 190 6、Driven motor power  kw 45 55 110 180 280 7、Overall dimensions mm L 4471 5173 5870 5900 7650 9120 W 1850 1865 2420 3460 3850 H 1800 1800 2562 2535 2720 2930 8、Weight t ~8.3 ~11.4 ~28 ~49 ~59 The machine is chiefly used as accessory of internal mixers to make rubber sheets. The rollers are made of chilled cast iron with vanadium and titanium alloys. The roller face is hard and anti-wear. The internal cavity is processed to make temperature well proportioned on the roll surface. The machine is equipped with an overload protection device to prevent the major components from being damaged due to overloading. The machine is also equipped with an emergency device. When an emergency accident happens, just draw the pull rod, and the machine will stop immediately. It is safe and reliable. The transmission system adopts a hard facing gear reducer, which has a compacted structure with higher transmission effciency, lower noise and longer service life. The base frame is a complete framework, which is convenient for installation. NOTE: all the models may be optionally equipped with either copper bushes or rolling bearings.

Keywords: rubber mixing machine

Contact Pahang Judong Industry Co.,Ltd.


Print this page