Rubber Coarse-Crusher

Rubber Coarse-Crusher from Pahang Judong Industry Co.,Ltd.

By: Pahang Judong Industry Co.,Ltd.  05-01-2010
Keywords: rubber recycling machine

 Type ZKC-560A ZKC-560B ZKC-560D Working Diameter of Front Roll(mm) 510 510 510 Working Diameter of Back Roll(mm) 560 560 560 Working Length of Rolls (mm) 800 800 800 Linear Speed of Front Roll(m/min) 23.7 24.3 23.37 Linear Speed of Front/Rear Rolls 1:1.55 1:1.55 1:1.55 Max. Nip 15 15 15 Capacity (Kg/h) 2000 2000 2000 Main Motor Model Y315M1-6 Y315L1-8 Y315L2-8 Motor Power(KW) 90 90 110 Motor Rotating Speed(r/min) 980 740 740 Speed Reducer Inverted-Y Speed Reducer NGW Planetary Hard-Gear Speed Reducer Reduction Ratio 11.6 34.65 35.64   Overall Dimensions(mm) Length 5400 5430 5500 Width 2330 2330 2330 Height 2100 2100 2100 Weight(KG) 17500 20000 20000The machine is applicable for cracking scrap rubber.The roller is made of chilled cast iron with vanadium and titanium alloys. The roller face is hard and anti-wear. Both the front roller and the back roller are fluted. The internal cavity of the roller is processed to make temperature well proportioned on the roller surface.The machine is equipped with an overload protection device to prevent the major components from being damaged due to overloading.The machine is also equipped with an emergency device. When an emergency accident happens, just draw the safety pull rod, and the machine will stop immediately. It is safe and reliable.The turning of the cylinder sieve will repeatedly send back those unqualified bigger rubber chips for further cracking.

Keywords: rubber recycling machine

Contact Pahang Judong Industry Co.,Ltd.


Print this page