Bale Cutter

Bale Cutter from Pahang Judong Industry Co.,Ltd.

By: Pahang Judong Industry Co.,Ltd.  05-01-2010
Keywords: rubber mixing machine

 Type XQL-8 XQL-16 Width (mm) 660 1000 Stroke (mm) 680 680 Diameter of the piston (mm) 150 150 Time Taken by the Stroke (second) 16~25 10~16 Power (KW) 5.5 5.5 Overall Dimension (LxWxH) 1900×720×2580 2240×720×2580 Weight (kg) 1500 2000 This bale cutter is mainly used to cut natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small pieces of rubber. This bale cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The lead is casted on the base under the rubber knife for protecting the edge of the rubber knife. When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber. Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder.

Keywords: rubber mixing machine

Contact Pahang Judong Industry Co.,Ltd.


Print this page