KAM OID Optical Inerface Detector

KAM OID Optical Inerface Detector from KAM CONTROLS S.E.A. SDN BHD

By: KAM CONTROLS S.E.A. SDN BHD  30-12-2009
Keywords: Kam Controls, Optical Interface Detectors

 The simplicity of design and quality of engineering employed in the KAM OID Optical Interface Detector mean there are no moving parts. Fiber optics within the patented optical probe respond to the absorption, fluorescence, and refractive properties of the fluid which is turned into an analog signal, or "optical signature." 

Measurement is fully automatic without the need for operator intervention or supervision. The output signal can be sent to the SCADA, PLC’s, or to a Central Control Room for logging or display on chart recorders or monitors.

Placing a preview OID sensor upstream and another at the station gives you the time and intelligence regarding the interface to always make the most advantageous cut.

The KAM OID sensor can be installed in an analyzer loop or in the main line, and because it’s easily mounted through a full-opening ball valve, you can insert or retract the probe without having to ever drain the pipe. 

FEATURES
• User friendly 
• Low power
• Explosion proof 
• Low maintenance 
• Lens cleans in place

APPLICATIONS
• Batching 
• Interface 
• Production 
• Transmix/regrade reduction 
• Quality control

SPECIFICATIONS
Media: Refined products
Material: Wetted parts–316 stainless steel
Power: 12–24 VDC, 10 Watts max
Output: 4-20 mA
Fluid temperature: -40º to 160ºF (-40º to 70ºC)
Electronics temperature: -40º to 160ºF (-40º to 70ºC)
Pressure ratings: ANSI 150, 300, 600, 900 
EX enclosure: 3" x 6" x 3" (76mm x 152mm x 76mm)
Pipe size: 3/4" to 48"

Keywords: Kam Controls, Optical Interface Detectors

Contact KAM CONTROLS S.E.A. SDN BHD

Email

Print this page

Share