ATEX SAFETY TORCH with LED
Sumotec Engineering & Trading
The Wolf ATEX Safety Torches with LED give reliable, simple, cost effective, high output LED performance in a straight or right-angle body style. The TR-30+ and TS-30+ torches, incorporating the Wolf TP-300 ‘Torch LED Module', give an exceptional output of up to four times more light than an incandescent torch bulb, generating a piercing white spot beam combined with a wide angle flood of fringe light, for excellent visibility in conditions of darkness or reduced visibility.
With a typical life of over 25,000 hours, the TP-300 LED is expected to last the product lifetime, minimising product maintenance and eliminating risk of light source failure. Additionally the highly efficient LED technology gives an increased battery duration of up to 27 hours from a set of two alkaline ‘D' cells, more than twice the duration from a conventional safety torch using the same cells.
The TP-300 incorporates a low battery indicator, emitting a flashing red indicator to show good battery power and correct torch function, changing to solid red to warn of 'low battery' power. After several hours in the ‘low battery' phase, the light will cut out.
The Wolf ATEX Torch range is CE marked compliant with the 94/9/EC ATEX Explosive Atmospheres Equipment Directive. Certification to the latest standards is for use in potentially explosive gas, vapour and mist atmospheres, zones 1 and 2, temperature class T4. Dust ignition protection covers use in zones 21 and 22, with the certified maximum surface temperature of 95°C. Temperature ambient of use is from -20°C to a maximum of +40°C or 55°C with certain cells as specified in the instructions.
The compact Wolf TS-30+ and TR-30+ Torch bodies, in straight or right-angle forms, have an enhanced ergonomic design for easy grip and single handed switching, even with gloved hands. The torch bodies offer high strength and proven impact resistance even at sub zero temperatures using carefully selected thermoplastic resins with excellent chemical resistance. Additionally, the rubber armoured lens ring and end cap give enhanced grip and shock protection. The shatterproof polycarbonate lens has a scratch and chemical resistant coating.
The Wolf ATEX Torches are sealed dust tight and protected from water immersion with a certified IP67 enclosure. The right angle model incorporates a replaceable high strength thermoplastic belt clip for hands-free use. Both models allow straight forward battery replacement. All models are supplied with wrist straps.
As well as for use in the TR-30+ and TS-30+ torches, the TP-300 ‘Torch LED Module' can be ‘retro-fitted' by the user into the Wolf ATEX Safety Torch T4 models including; TR-24, TR-24+, TS-24 or TS-24+ to bring these same improvements to Wolf ATEX T4 torches already in use.