T966Y Feed Water Electric Control Valve, ASTM A105

T966Y Feed Water Electric Control Valve, ASTM A105 from Shanghai Shinjo Valve Co., Ltd.

By: Shanghai Shinjo Valve Co., Ltd.  20-01-2017
Keywords: Valves, Ball Valves, Control Valves

Brif Introduction: This T966Y feed water control valve is suitable for installing on the spraying water pipeline of the desuperheater, and its function is to adjust the cooling water so as to reduce the temperature of the steam of the boiler, it can also use on the other pipeline of the boiler and adjust the flow. The valve is derived by pneumatic actuator with positioner, and electrical actuator is also available. Installation: 1. The valve must be installed on the pipeline vertically, connected with flange. 2. The flow direction on the valve body shall same to the installation direction. 3. In installation, the opening and closing position of the electric actuator shall same to the valve. 4. When clean the pipeline, some necessary measures shall be took in order to prevent the valve from sticking because of something left between the disc and seat, which may reduce the working life. Confirmation Before Order: 1. Type (Including the actuator type, connect type, and material of the body and so on). 2. Nominal Pressure PN (MPa). 3. Nominal Diameter DN (mm). 4. Working Pressure (MPa). 5. Pressure differential of Water: Inlet pressure (MPa) and outlet pressure (MPa). 6. Water Temperature (℃). 7. Cv value or the maximal flow rate (t/h). 8. Other technical requirement. If the electric actuator is applied, the controlling signal shall be noted (0~10 or 4~20mA), if the pneumatic actuator is applied, bellow information shall be noted: 1. If hand wheel is needed; 2. Air filter pressure reducer; 3. Positioner, if it is the electro pneumatic valve positioner, please note the electric signal (0~10 or 4~20mA); 4. Air supply pressure; 5. Air-closing or air-opening.

Keywords: Ball Valves, Cast Steel Valves, Control Valves, Plug Valves, Pressure Reducing Valves, Valves

Contact Shanghai Shinjo Valve Co., Ltd.

Email

Print this page

Share

Other products and services from Shanghai Shinjo Valve Co., Ltd.

A42H Spring Loaded Safety Valve, ASME, API 526, GB/T 12243-2005 from Shanghai Shinjo Valve Co., Ltd. thumbnail
20-01-2017

A42H Spring Loaded Safety Valve, ASME, API 526, GB/T 12243-2005

China Spring Loaded Safety Valve Manufacturer Shinjo Supplies A42H Spring Loaded Safety Valve, ASME, API 526, GB/T 12243-2005, 150-900LB, PN16-PN320.


A41H Spring Loaded Safety Valve, 150-900LB, PN16-PN320 from Shanghai Shinjo Valve Co., Ltd. thumbnail
20-01-2017

A41H Spring Loaded Safety Valve, 150-900LB, PN16-PN320

China Spring Loaded Safety Valve Manufacturer Shinjo Supplies A41H Spring Loaded Safety Valve, 150-900LB, PN16-PN320, ASME, API 526, GB/T 12243-2005.


T961Y Feed Water Control Valve, ASTM A105, SS304/20Cr13 from Shanghai Shinjo Valve Co., Ltd. thumbnail
20-01-2017

T961Y Feed Water Control Valve, ASTM A105, SS304/20Cr13

China Feed Water Control Valve Manufacturer Shinjo Supplies T961Y Feed Water Control Valve, ASTM A105 Body & Bonnet, SS304/20Cr13 Stem, Disc & Seat.


HTSW Pneumatic Control Valve, DN40-DN200, Class 150-600 LB from Shanghai Shinjo Valve Co., Ltd. thumbnail
20-01-2017

HTSW Pneumatic Control Valve, DN40-DN200, Class 150-600 LB

China Pneumatic Control Valve Manufacturer Shinjo Supplies HTSW Bellows Seal Globe Pneumatic Control Valve, DN40-DN200, Class 150, 300, 600 LB.


ZJHP Pneumatic Single Seat Globe Control Valve from Shanghai Shinjo Valve Co., Ltd. thumbnail
20-01-2017

ZJHP Pneumatic Single Seat Globe Control Valve

China Pneumatic single seat globe control valve Manufacturer Shinjo Supplies Pneumatic single seat globe control valve, WCB, WCC, WC6, CF8, CF8M, CF3(304L), CF3M(316L)


DP163 GG-20 Steam Pressure Reducing Valve (PRV) 2.5 Mpa from Shanghai Shinjo Valve Co., Ltd. thumbnail
20-01-2017

DP163 GG-20 Steam Pressure Reducing Valve (PRV) 2.5 Mpa

China GG-20 Steam Pressure Reducing Valve Manufacturer Shinjo Supplies GG-20 Steam Pressure Reducing Valve, DP163, 2.5 Mpa, Super High Sensitivity.


DP27 SS304 Steam Pressure Reducing Valve (PRV) 2.5 Mpa from Shanghai Shinjo Valve Co., Ltd. thumbnail
20-01-2017

DP27 SS304 Steam Pressure Reducing Valve (PRV) 2.5 Mpa

China SS304 Steam Pressure Reducing Valve Manufacturer Shinjo Supplies SS304 Steam Pressure Reducing Valve, DP27, 2.5 Mpa, Super High Sensitivity


DP25 WCB Steam Pressure Reducing Valve (PRV) 2.5 Mpa from Shanghai Shinjo Valve Co., Ltd. thumbnail
20-01-2017

DP25 WCB Steam Pressure Reducing Valve (PRV) 2.5 Mpa

China WCB Steam Pressure Reducing Valve Manufacturer Shinjo Supplies WCB Steam Pressure Reducing Valve, DP25, 2.5 Mpa, Super High Sensitivity.


DP17 GG-20 Steam Pressure Reducing Valve (PRV) 2.5 Mpa from Shanghai Shinjo Valve Co., Ltd. thumbnail
20-01-2017

DP17 GG-20 Steam Pressure Reducing Valve (PRV) 2.5 Mpa

China GG-20 Steam Pressure Reducing Valve Manufacturer Shinjo Supplies GG-20 Steam Pressure Reducing Valve, DP17, 2.5 Mpa, Super High Sensitivity.


Eccentric Plug Valve, EPV, Class 150, 300, 600, 900 LB from Shanghai Shinjo Valve Co., Ltd. thumbnail
06-01-2017

Eccentric Plug Valve, EPV, Class 150, 300, 600, 900 LB

China Eccentric Plug Valve (EPV) Manufacturer Shinjo Supplies Class 150LB, 300LB, 600LB, 900LB Eccentric Plug Valve (EPV), ASTM A216-WCB, ASTM A351-CF8.


Pressure Balanced Plug Valve, Class 150, 300, 600, 900 LB from Shanghai Shinjo Valve Co., Ltd. thumbnail
06-01-2017

Pressure Balanced Plug Valve, Class 150, 300, 600, 900 LB

China Pressure Balanced Plug Valve Manufacturer Shinjo Supplies Pressure Balanced Plug Valve, Class 150 LB, 300 LB, 600 LB, 900 LB, API 599, API 6D.


Cast Steel Globe Valve, Class 600 LB, A216 WCB, BS 1873 from Shanghai Shinjo Valve Co., Ltd. thumbnail
06-01-2017

Cast Steel Globe Valve, Class 600 LB, A216 WCB, BS 1873

China Class 600 LB Cast Steel Globe Valve Manufacturer Shinjo Supplies Class 600 LB Cast Steel Globe Valve, ASTM A216 GR WCB, BS 1873 / ASME B16.34.


DIN Bellow Seal Globe Valve, PN16, PN25, PN40, GS-C25 Body from Shanghai Shinjo Valve Co., Ltd. thumbnail
06-01-2017

DIN Bellow Seal Globe Valve, PN16, PN25, PN40, GS-C25 Body

China DIN Bellow Seal Globe Valve Manufacturer Shinjo Supplies DIN Bellow Seal Globe Valve, PN16, PN25, PN40, GS-C25 1.7363, 1.4308, 1.4408, 1.4306, 1.4301.


Full Port Bolted Bonnet Gate Valve, Class 900, 1500 LB from Shanghai Shinjo Valve Co., Ltd. thumbnail
06-01-2017

Full Port Bolted Bonnet Gate Valve, Class 900, 1500 LB

China Full Port Bolted Bonnet Gate Valve Manufacturer Shinjo Supplies Full Port Bolted Bonnet Gate Valve, Class 900 LB, 1500 LB, Thread/Flanged Ends.